SL Enterprises SolarSL Enterprises

Home
SLE Solar Catalog
Contact
Policies
Mission
Links

 

Search:


Home: SLE Solar Catalog: Electronics:

110 VDC 50 Amp
110 VDC 50 Amp Neutral Relay with Limit Switch

Cat. No. MT-45700-013
Weight 1 lbs

12 Volt 100 amp White Rogers Relay
12 Volt 100 amp White Rogers Relay

Cat. No. MT-120-901
Weight 1 lbs

200 amp white Rogers Reley
12 Volt and 48 Volt 200 amp white Rogers Reley

Cat. No. MT-586-90
Weight 2 lbs

AC Voltage Transducer
The AC-VSEN includes 3 voltage transformers for up to 3 voltage inputs

Cat. No. BEP-AC-VSEN-4
Weight 6 lbs
$104.97

Alternate Action Relay
The Model 091-98-12 Alternate Action Relay is designed to remotely turn a load ON and OFF by grounding an input to the relay.

Cat. No. 091-98-12
Weight 2 lbs
$81.00

Auto Current A DC Current Sensor
The Auto Current A is an Auto Current with auxiliary input, which when grounded causes the output relay to operate.

Cat. No. K-ACADC
Weight 2 lbs

Auto Current DC Current Sensor
The Auto Current detects current flow and closes a relay providing a remote indication.

Cat. No. Auto Current
Weight 2 lbs

Auto Current F
The Auto Current F detects current and closes a switch when the sensed current flows to provide a remote
indication

Cat. No. MT-802943
Weight 1 lbs

Auto Current F-A
The Auto Current F-A is an Auto Current F with an auxiliary input, which when grounded causes the output relay to operate.

Cat. No. K-ACFA
Weight 2 lbs

Auto Interlock II
The Auto Interlock II is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started.

Cat. No. 091-134
Weight 2 lbs

Auto Interlock III
The Auto Interlock III is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started.

Cat. No. 091-134A
Weight 2 lbs
$251.00

Auto Interlock IV
The Auto Interlock IV is a 4 pole, 50 ampere power transfer relay which automatically transfers the 120 volt A.C.

Cat. No. 091-197
Weight 4 lbs
$476.00

Auto Trol
The Auto-Trol low frequency cutout relay is intended to protect A.C. loads by disconnecting them from the power source when the frequency of that power source drops below 60 Hz.

Cat. No. 091-36-X
Weight 2 lbs
$197.00

Capacitor .47
.47 Capacitor Usage : MagneTek 3200 & 6300 Series

Cat. No. MT-17506201L
Weight 1 lbs
$3.00

Capacitor 4, 6.9 & 10 MFD
Usage: MagneTek, Triad-Utrad, Ferroresonant

Cat. No. MT-17506
Weight 2 lbs

Charger Board MagnetTek Q
Charger Board MagnetTek Q

Cat. No. MT-91068801-001
Weight 1 lbs
$41.80

Charger Board Progressve Dynamics
Progressve Dynamics Charger Board 6 Pin Step Charger and PC Board (Usage: DPI Q Model Inear Converters)

Cat. No. MT-PDIB
Weight 1 lbs

DC Coil DPDT Relay
110 and 12 Volt DC Coil DPDT Relay Universal generator transfer Relay

Cat. No. MT-102084
Weight 1 lbs

Diode 25 Amp PDI
Diode 25 Amp PDI (Usage: MagneTek, Progressive Dynamics)

Cat. No. MT-100715
Weight 1 lbs
$10.89

Diode 35 Amp Stud Mount
Diode 35 Amp Stud Mount

Cat. No. MT-SD35
Weight 1 lbs
$21.78

Diode 50 Amp
50 Amp Negative Diode (Usage: Triad-Utred, Ferroresonant) Positive (Usage: MagneTek, Ferroresonant & Linear)

Cat. No. MT-M915001
Weight 1 lbs
$12.10

Diode 6 Amp 200 Volt
Diode 6 Amp 200 Volt (Usage: MagenTek, PDI)

Cat. No. MT-18508028
Weight 1 lbs
$6.05

DPDT 30A Relays
These double-pole, double-throw relays can be used for up to 30 amps at 12 or 24 volts DC or 250 volts AC.

Cat. No. AEE-53.82
Weight 1 lbs

Dual USB Charging Port
The 091-219 Dual USB Charging Port is designed to fit into a standard 1.45" x 0.83" panel cutout.

Cat. No. K-091-219
Weight 1 lbs
$39.00

Dynamic Disconnect
The Dynamic Disconnect is a coupling device wired between an Auto Eject and the vehicle and serves to only connect the A.C. power after the plug has been inserted into the Auto Eject.

Cat. No. 091-18-098
Weight 1 lbs
$70.00

Load Manager
The LOAD MANAGER is a precision solid state controller which sequentially switches ON seven relays at 1/2 second intervals. Individual switches, which the user may install, can select a combination of outputs.

Cat. No. 091-32
Weight 2 lbs
$326.00

Load Manager 1901
The Load Manager 1901 is designed to meet and exceed all the requirements of NFPA 1901.

Cat. No. 091-86-1901
Weight 1 lbs
$387.00

Load Manager 1H
The LOAD MANAGER 1H is a small economical assembly that monitors a D.C. voltage and operates a relay when the voltage drops below its set point.

Cat. No. 091-96-
Weight 2 lbs
$89.00

Load Manager 1HP
Load Manager 1HP, is a compact, encapsulated load manager, that monitors the battery voltage, and operates a 75 ampere relay to de-energize a load when the voltage drops.

Cat. No. 091-167-12
Weight 1 lbs
$146.00

Load Manager 2
The LOAD MANAGER 2 is a simple, compact assembly for installation in applications that require the shedding of only 2 loads.

Cat. No. 091-79
Weight 2 lbs
$144.00

Load Manager Mark II
The “LOAD MANAGER MARK II” is a precision solid-state controller, which sequentially switches 8 self-contained relays at 1/2 second intervals.

Cat. No. 091-60A
Weight 1 lbs
$516.00

Load Manager P
The Load Manager P is a precision low voltage disconnect designed to shut down a radio or computer to prevent complete discharge of a vehicle's battery.

Cat. No. 091-141
Weight 2 lbs
$128.00

Logic Module
The Logic Module implements the logic "OR" or "AND" function in a variety of alarm or control applications.

Cat. No. 091-158
Weight 1 lbs
$86.00

Lyght Power Systems Relays
Used in the PS 250

Cat. No. 95-TD50736767
Weight 1 lbs
$56.00

Lyght Power Systems Relays Time Delay with Pan
Small time delay board with pan to fit ESCO and Lyght Power transfer switches

Cat. No. 95-TD30737073
Weight 1 lbs
$35.00

Over Voltage Relay
The 091-108 Over Voltage Relay is a device that continuously monitors the voltage of the battery.

Cat. No. 091-108-012
Weight 1 lbs
$91.00

Potted Bridge
Potted Bridge (Usage: DPI Q Series Linear Converters)

Cat. No. MT-802941
Weight 1 lbs
$45.79

Potted Bridge and time delay
Potted Bridge (Usage: DPI Q Series Linear Converters)

Cat. No. MT-811126
Weight 1 lbs
$75.00

Power Save Timer
Power Save Timer limits the duty cycle of an A.C. load to 1 hour "ON" and 1 hour "OFF".

Cat. No. K-091-191-115
Weight 1 lbs
$164.00

Programmable UV & OV Relay
The UV-OV Relay Precise - Programmable Voltage Detector monitors the battery system voltage and detects both over voltage and under voltage conditions.

Cat. No. 091-45
Weight 1 lbs
$161.00

Relay Board 2
Two relays are mounted and are energized individually from power supplied through the terminal strip.

Cat. No. 091-32-029X-XX
Weight 1 lbs
$54.00

Relay Board 4
Four relays are mounted and are energized individually from power supplied through the terminal strip.

Cat. No. 091-32-024X-XX
Weight 1 lbs
$77.00

Replacement Circuit Board for ES350
Replacement Circuit Board for ES350

Cat. No. 71-B104501
Weight 1 lbs
$245.09

Resistor .11 Ohm Limit
.11 Ohm Limit Resistor (Usage: Progressive Dynamics)

Cat. No. MT-104273
Weight 1 lbs
$14.52

Resistor .250 Ohm
.250 Ohm Resistor (Usage: BW Phillips Series, Progressive Dynamics, Inc.)

Cat. No. MT-104273
Weight 1 lbs
$12.10

Resistor .3 Ohm 30 Watt
.3 Ohm 30 Watt Resistor (Usage: MagneTek 3200 Series)

Cat. No. MT-16506517
Weight 1 lbs
$21.10

Soft Start
The “Soft Start” is a precision, solid-state controller, which sequentially switches “ON” seven loads at l/2 second intervals.

Cat. No. 091-27
Weight 2 lbs
$187.00

SPDT 12 Volt Relay
Usagae: Progressive Dynamics, MagneTek, Universal replacement rated 50 amps Plus DC

Cat. No. MT-101245
Weight 1 lbs
$42.80

SPDT 12V 40A Relay
These single-pole, double-throw 40 amp enclosed relays are widely used in the automotive industry. Wires may be attached with 1/4" quick connect terminals or the relay socket below may be used.
Nominal operating current is 140mA. Relay socket has 2 feet

Cat. No. AEE-53.8290
Weight 1 lbs
$8.80

SPDT Relay Socket for 40 Amp Relay
SPDT Relay Socket for 40 Amp Relay

Cat. No. AEE-53.8291
Weight 1 lbs
$4.40

SPST N.O. 12V 75A Relay
This enclosed single-pole, single-throw relay has one set of contacts that close when power is applied to the coil terminals. It can be used to turn on 12 volt loads of up to 75 amps.

Cat. No. AEE-53.8293
Weight 1 lbs
$18.00

Time Delay Board
Time Delay Board s Todd Engineering PS-250 Opta ITS-50C Lyght Power PTime Delay Board LPT50CA LPT30, LPT50 MRD and LPT50 BRD

Cat. No. MT-TDB
Weight 1 lbs

Time Delay Board For a ES50 VOLT
Time Delay Board For a ES50 VOLT

Cat. No. 71-B108501
Weight 2 lbs
$435.14

Time Delay Relay, DODO
The Model 091-103-012 Time Delay Relay is designed to keep a load energized for some time interval after the load is de-energized.

Cat. No. 091-103-012-X
Weight 1 lbs
$93.00

Time Delay Relay, DOPI
The Model 091-100-12 Time Delay Relay is designed to delay the operation of a device for a definite time interval after energizing some other equipment.

Cat. No. 091-100-012-X
Weight 1 lbs
$89.18

UV OV Relay
The UV-OV Relay Precise - Programmable Voltage Detector monitors battery voltage and detects both over voltage and under voltage conditions.

Cat. No. 091-45
Weight 1 lbs
$161.00





©SL Enterprises All rights reserved