Intellitec Bi-Directional Relay Cat. No. 00-00362-100 Weight 1 lbs

$125.00

Intellitec s Bi-Directional Isolator Relay DeIay offers a new approach to charging batteries in an RV application. Unlike prior systems that only allowed charging the RV battery from the engine s alternator, the Bi-Directional Isolator Relay Delay charges both batteries when either one is being charged. When the coach is being driven, both batteries will be charged from the engine s alternator. When the coach is plugged into shore power, both batteries will be charged from the converter. If neither battery is being charged, the batteries are fully isolated. The controller also senses heavy loads on either battery to prevent the wrong battery from being inadvertently discharged. It operates by sensing the voltage on both batteries. When either of these voltages exceeds 1 3.3 volts for approximately 1 2 seconds, which happens when either battery is being charged, the control will close the isolator solenoid, connecting the two batteries together, charging them both. (Normal charging voltages are from approximately 1 3.8 to 14.4 volts.) After the solenoid has been closed, the system continues to sense the voltage. If the ignition switch is off and the battery voltage drops below 1 2.8 volts for approximately 5 seconds, which might occur when the converter is heavily loaded, the solenoid is opened to prevent the chassis battery from being discharged by the coach loads. When the voltage goes above 1 3.3 volts again for approximately 5 seconds, the solenoid closes again. If the ignition switch is on, the control allows the voltage to drop below 12.0 volts for approximately 5 seconds, before the solenoid is opened to insure the alternator s full output is available for important chassis functions. When the voltage goes above 1 3.3 volts again for approximately 5 seconds, the solenoid will close.