Auto Pump Tester Cat. No. 091-205 Weight 1 lbs

$236.30

In the repair and servicing of the Auto Pump it is necessary to measure the pump's capacity, that is, how quickly will the pump pressurize a given tank. Also it's important to measure the maximum pressure that can be attained. Leaking seals and gaskets will limit the maximum pressure as will dirty or warn valves. A service technician will normally want to measure the pressure at which the pressure switch turns OFF the pump and when the pressure drops, to measure the pressure at which the pump is restarted. The AUTO PUMP TESTER contains a pressure gauge to measure pump output pressure and a "bleeder valve" to reduce tank pressure to determine the pump startup point. 150 PSI Max Used to test operation Used to test pump valve leakage Used to test and adjust pressure switch 1 year warranty Maximum Pressure: 150 PSI Input Hose: 1/4 Inch Diameter Input Hose Length: 18 Inches Input Hose Fitting: 1/4 NPT Male Weight: 9 lbs Warranty: 1 Year Instruction Manual.pdf (62 Kb)