DC Energy Display Cat. No. 023-4346-0 Weight 1 lbs

$488.80

The DCE provides accurate low cost instrumentation for 3 banks of batteries between 9.5 and 33 volts. The unit displays voltage for three banks and amps or amp-hours for the house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. Low and High voltage alarms and Low Amo-Hours Remaining alarms can be set on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. The DCE comes complete with a precision 500 amp shunt and is designed to work with 50-500 amp 50 mV shunts. Displays 12 or 24 volts Displays up to 500 amps Displays energy used and remaining for up to 3,000 amp-hour capacity Monitor voltage on up to three separate banks of batteries Monitors Charge / Discharge Amperage Monitors Total Energy: Amp-Hours or Percent of Charge Alarms: High / low voltage and low amp-Hours remaining 3 year warranty Power Supply: 9.5 to 33.0 VDC, .018 amps nominal Operating Temperature: 32 to 122 F (0 to 50 C) Accuracy: Better than +/- 0.1 VDC for Volts and 1% +/- 1 Amp for Amps Volts Range: 9.5 to 33.0 VDC Amps Range: -500 to +500 Amps (Applies to Bank 1 Only) Amp-Hours Range: 100to 3000 A/H (Applies to Bank 1 Only) Capacity Remaining Range: -0 to +100% (Applies to Bank 1 Only) Shunt: 500 Amp, 50 mV Alarms: High, Low Voltage & Low Amp-Hours NMEA 0183: $IIXDR, V; $IIXDRA, A; $IIXDR,G Weight: .25 lbs Warranty: 3 Years Instruction Manual.pdf (160 Kb) Product Specifications.doc (98 Kb)