The
Auto Charge 20 is a fully automatic battery charger for vehicles with
three independent batteries which must be charged. The charger contains
3 separate and independent circuits, 1 for each battery. Each battery
is independently sensed and charged as required. Even though the total
for all three outputs is limited to 20 amperes any one of the batteries
may receive up to 20 amperes if the other batteries do not require a
charge. Rugged construction permits vehicle mounting or the charger may
be wall mounted. Optional indicators are available to remotely display
when the batteries are charged.
- Automatically charges three battery banks utilizing
independent
sense circuits that control voltage and current to each battery, thus
parasitic loads on one battery have no effect on the others
- A
patented built-in sense circuit checks battery voltage 120 times per
second to compensate for voltage drop in charging wires providing quick
re-charge, with no overcharge
- Full amperage
output is available to any battery if the adjacent banks do not require
charging, optimizing use of available power in charging banks with
differing parasitic load rates
- Designed
for rigors of emergency vehicle use; heavy duty aluminum case with
protective front panel plate and wire strain relief
Specifications:
Input: 120
VAC
50/60 Hz, 4.7 Amp
Output Volts: for 12V batteries
Output Current: 0-20 amps output current determined
by state of charge of batteries
Output Fuse (Recommended): 40 Amps
Weight: 22 lbs
Warranty: 3
Years
Model# |
Output Voltage |
Output Amps |
Input Voltage |
Option |
Optional
Indicator |
091-10-6 |
6 |
20 |
120 V.A.C. |
none |
YES |
091-10-12 |
12 |
20 |
120 V.A.C. |
none |
YES |
091-10-24 |
24 |
10 |
120 V.A.C. |
none |
YES |
091-10-DV-12 |
12 |
20 |
120V OR 230V |
DV |
YES |
091-10PIM |
12 |
20 |
120 V.A.C. |
PIM |
NO |
Datasheet.pdf (752 Kb)
Instruction Manual, 12 Volt.pdf (135 Kb)
Instruction Manual, 24 Volt.pdf (135 Kb)
Product Specifications, 12 Volt.doc (2,643 Kb)
Product Specifications, 24 Volt.doc (2,643 Kb)