Auto Throttle 1 Cat. No. 091-84 Weight 1 lbs

$128.70

The Auto Throttle 1 is a voltage detector, designed to operate any throttle system, to increase engine speed when insufficient alternator output drops the battery voltage. Time delays are provided to inhibit the unit from operating, when the voltage drops for only a short period of time. Then, once a high idle is produced, it is maintained for 5 minutes. This reduces the ON/OFF cycling. The output of the Auto Throttle 1 is the closure of a relay, with 20 ampere contacts. This contact closure may be utilized to operate any actuator, or switch the input to an electronic engine control. Operation occurs when the unit senses less than 12.5 volts, for a minimum of 15 seconds. The relay then operates, to produce the high idle, and remains energized for at least 5 minutes, or until the voltage rises above 13.4 volts, whichever occurs later. The Auto Throttle 1 senses battery voltage, and provides the necessary control signals to speed up the engine. It does not provide the mechanism to increase the speed. This is supplied by the installer. High Idle control Increases alternator output Simple, easily installed Time delays eliminate cycling Usable with any throttle actuator 3 year warranty Input: 12 Vdc, 1 Amp Max Set Point: "ON" at 12.5 Volts (Field Adjustable), "OFF" at 13.4 Volts  On Delay: 15 Seconds Off Delay: 5 Minutes  Relay Contacts: Normally Open - 30 Amps                               Normally Closed - 20 Amps  Indicator: Red LED - Output "ON", Low Voltage Sensed                     Green LED, Output "OFF", Voltage Normal Weight: .25 lbs Warranty: 3 Years  Instruction Manual.pdf (94 Kb)