These Aquatec booster pumps provide “town
pressure” for remote home water supplies where 12-volt or 24-volt power
is available. They have a longer life and greater flow rate than other
diaphragm booster pumps and they use less than half the energy consumed
by an AC jet pump running on an inverter. The 120-volt version can be
used on remote power systems with inverters.
Aquatec’s 550
pressure pumps delivers powerful flow rates at pressures up to 60 PSI.
Their patented 5-chamber diaphragm and piston design allows these pumps
to operate at very low noise levels and with minimal pulsations. These
pumps are designed for intermittent duty, though most models can be run
continuously for hours at a time. They are commonly used either to
pressurize water from an atmospheric tank, to deliver purified water to
a specific point of use, or simply to increase pressure when required.
The built-in
pressure switch is set for 60 psi off and 40 psi on. The pumps come
with straight threaded male half-inch fittings that snap into the quick
disconnect ports. The optional strainer is highly recommended to keep
debris out of the pump, insuring long diaphragm life.
All Aquatec 550
Pressure Pumps weigh 8 pounds each.
|
Aquatec model
|
Voltage
|
Max. gpm
|
Pressure (psi)
|
Current draw (amps)
|
Item code
|
|
5503-AEE-B636
|
12 VDC
|
4.10
|
30
|
11.0
|
075-04805
|
|
3.80
|
40
|
13.0
|
|
3.55
|
50
|
14.6
|
|
5503-AEE-B736
|
24 VDC
|
4.10
|
30
|
5.5
|
075-04809
|
|
3.80
|
40
|
6.5
|
|
3.55
|
50
|
7.3
|
|
5503-AEE-B656
|
120 VAC
|
4.10
|
30
|
1.42
|
075-04813
|
|
3.80
|
40
|
1.60
|
|
3.55
|
50
|
1.80
|
|
Strainer
|
High flow 50 mesh in-line strainer
|
075-04821
|
SL Enterprises
