MidNite Solar MNPV Combiners Cat. No. MNPVx Weight 5 lbs

MNPV3 & MNPV6 Combiners The MNPV3 & MNPV6 combiner is rated for outdoor use. Although designed primarily for combing PV strings up to 150 Vdc, the MNPV6 may be used for combining four high voltage strings using ATM fuses up to 15 amps. The use of touch safe DIN rail mount fuse holders and fuses allow operation up to 600 Volts. The MNPV6 combiner comes with two copper bus bars. One for circuit breakers (6) and one for fuses (4). The MNPV3 busbar is designed for circuit breakers only. Type 3R aluminum chassis with flip up cover. ETL listed for US and Canada. Applications: • PV combiner up to six strings using DIN breakers rated for 150 Vdc • 120 amps total output PV combining up to four strings using ATM 6, 10 or 15 touch safe fuse holders rated for 600 Vdc • DC load center using 150 Vdc DIN breakers Features include: • All aluminum powder coated housing; light gray • Flip up cover that can stay in the open position during installation • PV Negative bus bar with 14 useable openings (10 #14-6 and 4 #1/0-14) • Chassis ground bus bar with 14 useable openings (10 #14-6 and 4 #1/0-14) • Standard DIN rail to mount up to 6 breakers or 4 fuse holders (MNPV6) • Tin plated copper bus bar to combine breaker outputs (MNPV6 busbar may be split in two) • Dead front cover snaps into place after wiring is complete for safety • Knock outs for PV in and PV out on bottom and sides • Top surface is available to bring conduit in from directly above the enclosure Sizes: MNPV3, 10.5 in x5 in. x3.5 in : $89.00 MNPV6, 13 in x 8 in. x 3.5 in : $109.00 MNPV12, 14 in x 9 in. x 3.5 in : $139.00 MNPV16, 17 in x 16 in. x3.5 in : $499.00