OutBack FX 2500 Inverter Sine Wave Inverte 24 to 48 Volt Cat. No. FX2524 Weight 67 lbs

$2,968.99

The OutBack FX2500 is a 2.5 kW continuous rated modular "building" block sine wave inverter/charger which can be used for both small and large power systems. Each OutBack FX2500 inverter/charger module is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or even three-phase (120Y208 VAC) configurations, allowing the system to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future. The FX2500 will also be available in export versions with 230 vac 50 hz output that can be connected in parallel (230 VAC) or in three phase (230Y400 VAC) configurations. Up to eight FX2500s can be connected together to provide up to 20 kW of continuous power conversion capacity. Sealed Construction Features: Powdercoated all aluminum die-cast chassis Internal electronic components are cooled by heat transfer Gaskets on all openings to provide water-resistance Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold etc. Conformal coated circuit boards to resist corrosion Designed to allow easy field servicing and repair Ideal Applications: Hot and humid climates where a protected area is not available for installation of the inverter/charger system Salt air environments such as Hawaii where you can’t get away from the salt air and where there is little difference between indoors and outdoors Dirty environments where dust or drifting organic matter such as cottonwood could clog an air opening in an unattended system Boats and RV’s where water might splash on the inverter Greater control of unwanted radio frequency interference SPECIFICATIONS FX 2548 FX 2348E Continuous Power Rating at 25 degrees C 2500 VA 2300VA Nominal DC Input Voltage 48 VDC 48 Nominal AC Input Voltage / Frequency 120V 60 Hz 230V / 50Hz Continuous AC RMS Output current at 25 C 21amps 10 amps Idle Power (typical at no AC load) (sleep – 3 watts) 21-23 Watts 21-23 Watts Efficiency (typical at 25 degree C and 75% resistive load) 93% 93% Total Harmonic distortion voltage (typical / max) 2% / 5% 2% / 5% Output Voltage Regulation +/- 2% typ. +/- 2% typ Surge Power Capability Peak (1mSec) 70 amps AC 28 amps AC Surge Power Capability RMS (100mSec) 50 amps AC 25 amps AC Overload Capability (from 25 C start) 5 second 4800 VA 4800 VA Overload Capability (from 25 C start) 30 minutes 3200 VA 3100 VA Automatic AC transfer Relay (at nominal AC) 60 amps AC 30 amps AC AC Input Current (adjustable limits) 60 amps AC 30 amps max AC Input Voltage Range (adjustable limits) 90-140VAC 200-260 VAC Frequency Range – AC Input 54-67.4 Hz 40 to 60 Hz DC Input Range (adjustable low battery cut-out) 40-66 VDC 40 - 66 VDC Recommended DC Breaker OBDC-100 OBDC-100 Continuous Battery Charger Output amps DC 35 amps DC 35 amps Shipping Weight 60 Lbs 60 Lbs Type: FX2532MT FX2524MT FX2536MT FX 2348 (export) : $100.00