Intellitec Battery Control Center Cat. No. 00-01087-100 Weight 2 lbs

$315.90

The Intellitec Single Disconnect Battery Control Center ( BCC ) is the ideal solution for the up fitter or OEM special vehicle manufacturer.The single disconnect BCC offers reliable battery control and fusing in a compact and rugged easy to install solution. Single disconnect BCC includes a remote disconnect for the auxiliary battery, a bi directional isolator, boost start function and 10 fuses to supply protected power from the auxiliary battery and ignition switched sources. One of these outputs is hot only when the ignition is off. This can be used as a lock out for various functions such as slide outs, PC monitors, TV`s etc.   The bi directional isolator relay delay ( BIRD) function charges both batteries when either one is being charged. When the vehicle is being driven, both batteries will be charged from the engines alternator. If the vehicle is plugged into shore power, both batteries will be charged from the converter. If neither battery is being charged, the batteries are fully isolated. The controller also senses heavy loads on either battery to prevent the wrong battery from being inadvertently discharged. The controller operates by sensing the voltages on both batteries. When either battery is being charged, the controller will close the isolator solenoid, connecting the two batteries together and charging them both. Specifications: Part Number:  00-01087-000 Standby Current: Less than 1 milliamp Ambient Temperature Range:  -40C to +85C Normal Input Voltage Range:  10 to 18 volts Short Term Over Voltage Protection: +26 volts Reverse Voltage Protection:  - 300 volts Positive Voltage Spike Protection:  +150 volts Operating Environment:  Under hood, out of direct weather Fuses: Fuse No. Function Fuse Size Source F1  Reverse Ign  15 Amp  Main Bat F2  Ign Sw  7.5 Amp  Main Bat F3  Ign Sw 1 5 Amp  Main Bat F4  Ign Sw  10 Amp  Main Bat F5  Aux Start Sw  5 Amp  BIRD F6  Spare  10 Amp  Disconnected Aux Bat F7  Spare  15 Amp  Disconnected Aux Bat F8  Spare  15 Amp  Disconnected Aux Bat F9  Spare  15 Amp Disconnected Aux Bat F10 Step Power  25 Amp  Disconnected Aux Bat Note: The sum of the continuous current through F2+F3+F4 must not exceed 30 Amps Associated documents for this product Data Sheet PDF: Click to download » Service Manual PDF Click to download »